http://www.coldstoragependingin.net

Shelter CKD 3x2x3 BF

Technical Specification

Shelther CKD 3 x 2 x 3 BF

 

  1.  Dimensi ( mm )
    1. Outlet Room Dimension : P 3.150 x L 2.150 x T. 3.150 mm.
    2. Inner Room Dimension  : P 3.000 x L 2.000 x T 3000 mm.
  2.  Panel Insulation.

            Wall panel floor panel dan roof panel

  1.  
    1. Outlet skin panel material  = pre painted galvanized,thickness 0.5 mm.
    2. Inner skin panel material   = pre painted galvanized,thikness 0.5 mm.
    3. Skin panel material from  = colorbond by Blue Scope.
    4. Skin panel protection        = Blue plastic protective film.
    5. Insulation                          = Polyuerethane foam density 40 kg / m3
    6. Surface profile skin panel = Coruggated profil interval 120,depth 3 mm.
    7. Panel thickness                  = 75 mm
    8. Notice                                = Floor panel with out corugated profile.
  2. Wall Panel

                 -     Wall thickness                    = 75 mm

                 -     Material for reinforcement = Multiplek 9 mm.

                 -     Joint system panel              * Wall to wall,metal cam lock.

                                                                   * Wall to Roof,flusthing ( material pre

                                                                      Painted galvanized,thickness 0.5 mm )

* Wall to floor,flushing ( material pre

    Painted galvanized thickness 0.5 mm )

  1. Roof Panel

           -    Roof Thickness                   = 75 mm

           -    Material for reinforcement = Not Aviable

           -    Joint system panel              = * Roof to roof metal cam lock

                                                               * Roof to wall,flusing ( Pre painted

                                                                  Galvanized,thickness 0.5 mm )

  1. Floor Panel

                 -    Floor thickness                    = 75 mm

                 -    Material for reinforceent     = Full with multiplek thikness 9 mm

                 -    Joint system panel               = * Floor to floor metal cam lock.

                                                                      * Floor to wall,flushing ( material pre

                                                                         Painted galvanized,thickness 0.5 mm )

                 -    Surface skin floor               = Vynil tile by Maxwell.

      6   Door panel

                -    Door panel thickness           = 75 mm

                -     Model                                 = 960 x 1960 mm

                -    Door thickness                    = 40 mm

                -    Gasket                                 = gray Rubber.

                -    Lockset                               =  dekson

                -    Hinger & handle door        = kend / cisa

                -    Door Stopper                      = Stainlesstell steel long hook.

 

 

 

 

7         Base frame

                 -   Bootom side                       =  UNP 100.50.5

                 -   Bootom end                       =   UNP 100.50.5

                 -   Midle End                          =  UNP 100.50.5

                 -   Cross member                    =  UNP 100.50.5

                 -   Wall Guide                        =   Angle 40.40.4

                 -   Floor support                     =  Angle 40.40.4

                 -   Joint system                       =  Bolt & nut.galvanized dia M12 x 35 mm

                 -   Joint to concrete floor       =   Stainless steel dynabolt dia M12 x 50 mm

  8    Additional Roof

                -   Reinforcement for roof      = Pre painted galvanized with omega profile

                -   Additional roof material    = Corugated zyncalum sheet tickness 0.45mm

                -   Front,rear & side cover roof  =  Pre painted galvanized

 

·         Door Canopy = Pre painted galvanized thickness 0.5 mm

·         Ventilation canopy = Pre painted galvanized thickness 0.5 mm

·         DC fan canopy  =  Pre painted galvanized tickness 0.5 mm

Thu, 21 Jun 2012 @14:32

Welcome
image

Marketing

021-32732731, 085104732731


Jl. H. Sarmah No. 1 Rt: 005 / Rw: 02 Kel. Parigi lama, Kec. Pondok Aren, Bintaro,
Kota Tangerang Selatan, Banten
INDONESIA
Visitor

SLINK
RSS Feed

Copyright © 2017 · All Rights Reserved